timecode universal studio display recording indication indicator Studio Warning Lights Signs Lamp Strip USB

Primary Links:


Submitted by HS on Tue, 2008-11-11 10:26.

Overview

Submitted by HS on Tue, 2008-11-11 11:18.
The Relay Extender is a new accessory, which takes the PunchLight product line into a new direction. You can control any other device, eg speakers, a microphone or even your own light system via one small additional box. It is very easy to connect it to an existing PunchLight MIDI or PunchLight GPI and automatically turn appropriate gear on or off.

Features

Submitted by HS on Tue, 2008-11-11 11:41.
  • Two relay patch with terminal plate
  • Two RJ10 inputs (12 V)
  • Connects to PunchLight MIDI or PunchLight GPI
  • Two blue LEDs indicate activation
  • Relay output: On / Off / Switchable
  • Auto / Lock switch - variable or fixed operation
  • Chaining; max. 10 units
  • No need for a PSU
  • Size - 105mm x 24mm x 54mm

Images

Submitted by HS on Tue, 2008-11-11 14:20.

Trigger Units

Submitted by HS on Fri, 2009-03-27 09:50.
PunchLight WLi
  • Switcher and power supply unit for the Recording Display, Recording PlexSign, Recording Lamp or Recording Ring
  • Connects directly to USB
  • LED indication of status on front panel
  • One 12V output for one external light
  • Transmits to unlimited "wireless" lights (currently via our W-CON RX receiver/s)
PunchLight DLi
  • Switcher and power supply unit for the Recording Display, Recording PlexSign, Recording Lamp or Recording Ring
  • Connects directly to USB
  • LED indication of status on front panel
  • One output for one Studio Display XT2 or SD2
  • Connects up to two light units in any combination
PunchLight MIDI
  • Switcher and power supply unit for the RECORDING Display, RECORDING PlexSign, RECORDING Lamp or RECORDING Ring
  • Connected to any MIDI interface
  • Two color LED indicates recording (red) and record ready/preroll (yellow)
  • HOLD buttons for manual switching RED and GREEN light
  • Connects up to three light units in any combination
PunchLight GPI
  • Switcher and power supply unit for the RECORDING Display, RECORDING PlexSign, RECORDING Lamp or RECORDING Ring
  • Connects to the GPI port of the SYNC I/O (or Universal Slave Driver)
  • Two-color LED indicates recording (red) and record ready/preroll (yellow)
  • HOLD buttons for manual switching RED and GREEN light
  • Connects up to three light units in any combination
Relay Switch Box USB
  • Control any other device, eg speakers, a microphone or even your own light system
  • Connects directly to USB port
  • Two relays with terminal plate
  • One 12V output for an external light