timecode universal studio display recording indication indicator Studio Warning Lights Signs Lamp Strip USB

Primary Links:


Submitted by HS on Thu, 2016-09-08 13:45.

Overview

Submitted by HS on Thu, 2016-09-08 13:47.

We have received many requests for our products to be connected wirelessly. So we developed a simple solution to replace the cables that go from trigger units (PunchLight Midi, GPI, DLi or Relay Switch Box USB) to external lights.

The Wireless Upgrade Kit consists of two small boxes. The first is a transmitter, connected to one of the trigger units via a 12V out. The second unit is a receiver, a small box which has one output and a connector for an external PSU. You can connect any of the PunchLight external lights to the receiver.

In the case of multiple studios and control rooms in the same place, you can choose up to 9 different transmitting channels and use multiple PL wireless kits independently of each other.

Features

Submitted by HS on Wed, 2017-02-01 14:46.
  • It consitst of two small wirelles units: TX and RX
  • Replaces cable between an external light and a trigger unit
  • Use in recording, production or music / audio studio
  • Easy installation
  • No additional software installation
  • One Power Supply for W-CON RX
  • Frequency 433,92 MHz
  • Dimensions: 60 x 54 x 24 mm (2,36″ x 2.13″ x 0,94″)
  • Supported triggers: PunchLight Midi, PunchLight GPI, PunchLight DLi, Relay Switch Box USB
  • Supported lights: Recording Display, Recording Strip, Recording Ring, Recording PlexSign, Studio Warning Lamp

Downloads

Submitted by PK on Thu, 2018-10-18 13:15.
Name Description Ver. Size Format Link
PunchLight W-CON Setup Instruction 55KB W-CON.pdf